Water bottom sensor (min 15mm of water required)
In stock
T4020-B2
Water bottom sensor (min 15mm of water required)
SKU
T4020-B2
$77.16
T4020-B2
Water bottom sensor (min 15mm of water required)
- Suitable with diesel, biodiesel, AdBlue® & antifreeze.
- Choose options to suit tanks 0.3m - 3m, 3m - 5m, 5m -10m.
- Accuracy +/-1% of tank capacity.
- Can be set up from the front panel.
- Electronic display with backlight (turns off after 1 hour).
- 1 gauge required per tank.
- Weatherproof to IP55.
- Gives continuous readout in litres & shows a % bar.
- Power supply can be 230V, 110V or 24VDC.
- Includes 4-20mA output. Can connect to a BMS.
- Options:
Choose bund probe (B8) or water sensor (T4020-B2).
If extending the probe cable on non ATEX O.L.E gauges low loss cable must be used (CABLE-4-BLACK).
Probe cable can be extended to 100m (CABLE-4-BLACK). We can calibrate your gauge within 24 hours of receiving our tank questionnaire (CALIB-C2020).
Products O.L.E.
OLE Probes and Accessories
T4020-B2 is available to buy in increments of 1